1,700 Double Sided Bundle 3.70"

Brute Magnetics, 1700 Pound magnet with threadlocker, gloves and rope
Brute Magnetics, 1700 lb magnet side view
Brute Magnetics, Red Rope plus attachment
Brute Magnetics, 1700lb magnet top view
Brute Magnetics, 1700 Pound magnet bottom view

1,700 Double Sided Bundle 3.70"

Regular price $124.99 Sale price $80.74 Save $44.25
/

15% off value price!

  • Magnet Type: Double Sided
  • Pull Force: 1,700 Lbs (combined)
  • Includes: Includes Rope, Gloves, Carabiner, 6ml bottle of Threadlocker
  • Free Standard Shipping (2 - 5 Business Days)
Shipping calculated at checkout.

Your favorite fishing magnet now comes in a bundle.

This magnet was specifically designed with magnet fishing in mind.  You won't have to worry which way the magnet is oriented under water since each side provides up to 850 lbs of pulling force.  The new design provides more versatility by allowing it to be used as a double sided, or single sided magnet. The eyebolt can screw into the side of the casing, or through the magnet face. Using this magnet in the single sided configuration will provide a stronger hold since the user is pulling perpendicular to the target.

Includes two stainless steel M10 eyelets.  This magnet is made with A3 steel plate and coated with Nickel-Copper-Nickel to be the strongest and most durable type of permanent magnet available.

Please note that holding power of 1700 lbs is a combined maximum weight between the two magnets.  Each side will produce around 850 lbs of pulling force.

Magnet Specifications:

Width: 3.70”
Height: 1.57”
Hole Diameter: 0.39” (10mm)
Material: NdFeB Magnet + A3 Steel Plate
Coating: NiCuNi
Pulling Force: 1,700 lbs combined (850 lbs per side)
Magnet weight : 4.80 lbs

Double Braided Rope Specifications:

Double Braided
65 feet
1,680 lb Breaking Strength
1/4" diameter (6mm)
8 inner strands
Rot and UV Fading Resistant
Not suitable for climbing
High quality carabiner rated to 5,600 lbs

The forces have been determined at room temperature on a plate of polished steel (A36) with a thickness of 1/2 inch.  The pull force is applied perpendicular to the face of the plate.  A maximum deviation of -10% compared to the specified force is possible in exceptional cases, generally the value is exceeded.  Depending on the type of application (thickness/condition of base metal, temperatures, and direction of pull), the forces can be influenced enormously. Mounting on vertical surfaces can reduce the pulling force by up to 70%.The indicated values solely serve a basis for comparison under above stated conditions. Please get advice and help from our experts.

Featured In

Recently viewed