The 1800 Lbs Clamp Magnet is your all-around clamp magnet workhorse. Designed to be not too big, not to small, and with a ton of magnetic pull force, our medium-sized clamp magnet will get a ton of use. Looking to upgrade your current double-sided magnet?
Meet the Clamp Collection: A new category of Brute magnets where 360° power meets double-sided versatility. For the fishers that expect more. Brute’s family of clamp magnets come in three sizes and are appropriate for magnet fishers of all ages and skill levels.
Each clamp magnet is constructed using a top-notch, single-sided neodymium magnet surrounded by a steel case. This design provides a larger magnetic field, allowing users to attract objects faster, easier, from farther away, and from every side.
Our clamp casing is made from a single piece of CNC machined high quality 45# steel. Single piece construction provides a much higher quality and stronger clamp compared to the common welded clamps on the market. By eliminating the weld we've removed a potential failure point.
The forces have been determined at room temperature on a plate of polished steel (A36) with a thickness of 1/2 inch. The pull force is applied perpendicular to the face of the plate. A maximum deviation of -10% compared to the specified force is possible in exceptional cases, generally the value is exceeded. Depending on the type of application (thickness/condition of base metal, temperatures, and direction of pull), the forces can be influenced enormously. Mounting on vertical surfaces can reduce the pulling force by up to 70%.The indicated values solely serve a basis for comparison under above stated conditions. Please get advice and help from our experts.
Magnet Care & Help
Choosing a magnet is different for everyone based on where you plan to Magnet Fish, how experienced you are and budget. Take our Magnet Fishing Quiz or check out our Buying Guide for help. Or feel free to email us!
To prolong the life of your magnet, rinse and dry thoroughly after each use. It also
doesn't hurt to rinse your ropes and wring them out.
Do not store anything damp in our airtight cases. This will lead to a corroded magnet, compromised rope and a smelly airtight case.
Due to the abrasive nature of magnet fishing, the surface coating will eventually become scratched, but that will not affect the pull strength of the magnet. To prolong the life of your magnet, consider adding an additional marine protectant or fluid film to help inhibit corrosion.
If you’re magnet fishing in saltwater you may want to consider one of our anti-corrosion magnets. These are made with a special stainless casing which makes them corrosion resistant.
Although it has the appearance of solid metal, neodymium actually behaves more like a ceramic and can crack/chip. Do not use in shallow or rocky waters. Consider our anti-collision magnets if you target these areas. WE ARE UNABLE TO REPLACE MAGNETS WHICH CHIP OR CRACK DURING USE, AS THIS IS AN INHERENT RISK OF MAGNET FISHING.
Heat above 160° F can permanently demagnetize your magnet.
Large magnets have a very strong attractive force and improper handling could cause severe pinching/crushing injury. Use caution!
Neodymium magnets are not toys. Keep away from children.
Pacemakers and other sensitive electronics can be adversely affected by strong magnetic fields. If you wear a pacemaker, do not handle strong magnets.
If you are using magnets to hang heavy objects, choose a weight rating that greatly exceeds the object to the hung. Our weight ratings are based on ideal conditions. Surface conditions and metal thickness greatly affect magnet capacity.
Breaking strength of our double-braided ropes:
Paracord : 649 LBS
¼” : 1,680 LBS
⅓” : 3,840 LBS
0.40” : 5,680 LBS
These breaking strengths are with a direct pull, no bends, kinks or other loops. All kits ship with rope that is sufficiently strong for the magnet when held under its own power. When magnets are wedged and require mechanical assistance to break free it is possible the force needed exceeds the breaking strength. It is best to exhaust all avenues of recovery prior to using mechanical force due to the potential for the rope to break. Shop our Ropes Collection.
It's not unusual for your magnet to get stuck; sometimes on a heavy object (like a metal pier column) or wedged between some rocks. When this happens, try these solutions;
Try pulling firmly and steadily but not with all your might to assess if you're freeing it or making it worse.
Pull from different angles (for example, the other end of the pier or the opposite side of the boat launch.)
Put a lot of slack in your rope and let the current (if there is one) work for you, moving your line into a new position.
If it’s safe and you can swim, go in after it! Some snorkeling gear will make this a fun and relatively effortless endeavor. You can actually pull yourself down the line directly to the magnet to visually assess the situation and free your magnet or you can stay on the surface and swim your line over and then past the point of hang up and free it from a different vantage point.
If all else fails, you might try a more aggressive approach with a bumper winch or come along. But beware, this can possibly stretch your rope to the breaking point.